Description

Specifications

		CG-75FXII	CG-130FXII	CG-160FXII
Acceptable sheet width		90mm~1,040mm (3.54″~40.9″)	90mm~1,580mm (3.54″~62.0″)	90mm~1,880mm (3.54”~74”)
Acceptable roll sheet		Outer less than φ200mm , Roll weight less than 18kg		Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1		760mm x 51m(29.9″ x 167′)	1,300mm x 51m(51.2″ x 167′)	1,600mm×51m(62.9”×167’)
Maximum auto cutting width*2		870mm (34.2”)	1,425mm (56.1”)	1,720mm (67.7”)
Maximum cutting speed		100cm/s (39.3″/s)
Maximum moving speed		140cm/s (55″/s)
Adjustable speed range*3		1-10cm/s : 1cm step adjustment (0.39″-3.94″/s : 0.39″ step adjustment) 10-50cm/s : 5cm step adjustment (3.94″-19.68″/s : 2″ step adjustment) 50-100cm/s : 10cm step adjustment (19.68″-39.37″ : 3.94″ step adjustment)
Mechanical resolution		5µm(0.0002″)
Command resolution		25µm or 10µm(0.001″ or 0.0004″)-MGL-IIc
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Max. pressure		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4		Vinyl up to 0.25mm(0.01″)thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5		Paper thickness: 0.06~0.13mm (0.0024″~0.005″)
Applicable tools*6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc
Interface		RS-232C,USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational	Temperature	5~35°C (41~95°F)
Operational	Humidity	35~75%(Rh) Non-condensation
Power requirement		AC100V~240V
Power consumption		145VA or less
Dimensions (WxDxH)		1,285mm(50.5″)x 700mm(27.5″)x 1,217mm(47.9″)	1,825mm(71.8″)x 700mm(27.5″)x 1,217mm(47.9″)	2,125mm(83.6″)x 700mm(27.5″)x 1,217mm(47.9″)
Weight (with stands)		50kg(110 lbs.)	60kg(132 lbs.)	69kg(152 lbs.)