Konica 512MH Print Head Cable 30P 300B-1.0

Product Details

Konica 512MH Head Cable 30P300B-1.0 Description

This generic head cable is suitable for Konica 512MH printheads. It connects the print heads to the print carriage board. This cable has 30 pins and is 300mm long and 31mm wide. We recommend changing the head cable when replacing the printhead.

Model: 30P300B-1.0

30P means there are 30 chips on the cable.
300 means the length is 30 cm.
B means the two ends of the chip are on the reverse surface.
1.0 means the distance between the two chips is 1 mm.

Konica 512MH Head Cable Specifications

Pins	30P
Length	30 cm
Pins Width	1.0 mm
Pin Direction	The chip at Reverse Face (B)
Suitable Printhead	Konica 512MH Head

Konica printhead cable models:

Konica head cable	Konica 1024i head cable both sides connector with card	60P
	Konica 512i/1024 head cable single side with card	60P
	Konica 512i head cable both sides connector with card	50P
	Konica head cable	30P300B-1.0
	Konica head cable	34P
	Konica grey line head cable	40P 70cm
	Liyu & Konica head cable	40P300A-1.0
	Liyu & Konica head cable for 512	16P 250